LVT-PROTECT™ Luxury Vinyl Tile Enhancer

LVT-PROTECT™ Luxury Vinyl Tile Enhancer

Item#: NCL2622
Pack/Size: Single 1 Gallon Bottle

LVT-PROTECT™ is a luxury vinyl tile enhancer designed to provide a maintainable "wear layer" that improves cleaning efficiency and protects your LVT investment. This water resistant coating creates a clear, protective barrier that adds a low, satin shine to reveal the true character, color and beauty of the original surface — improving slip resistance (UL Listed) and enhancing cleaning ability. Use it on new LVT to protect and enhance original beauty, or on worn LVT to restore and revitalize the look. Compatible with linoleum, no-wax floors, and synthetic surfaces. (Item# NCL2622)

Features

• Creates a maintainable wear layer over LVT surfaces
• Water resistant coating — UL Listed for slip resistance improvement
• Low, satin shine reveals true character, color and beauty of the surface
• Scrub and recoat compatible with NCL® QWIK-SCRUB™
• pH below 10 — complies with LVT manufacturer recommendations
• For use on new and worn LVT, linoleum, no-wax, and synthetic floors

Benefits

• Protects floor surface from traffic, spills, and wear
• Restores and revitalizes the look of worn, dull, lifeless LVT
• Improves cleaning efficiency — reduces long-term maintenance labor
• Enhances gloss and color for a like-new appearance
• Safe for use on rubber surfaces
• Extends the life of your LVT investment

Directions for Use

New Luxury Vinyl Tile Procedures:

1. Dust mop floor to remove all dry soil and loose debris prior to cleaning.
2. Clean the surface using NCL® QWIK-SCRUB™ at a 1:10 dilution using a mop and bucket or automatic scrubber with a RED cleaning pad. Rinse and allow to dry thoroughly.
3. Using a wet mop or microfiber applicator, apply LVT-PROTECT™ at a rate of 2000–3000 sq. ft. per gallon. Allow to dry thoroughly.
4. Worn, dull, lifeless LVT may require more than one application. Repeat step 3 as desired, allowing adequate time for drying between each coat.
5. Routine cleaning is recommended using NCL® LVT-CLEAN to prolong the life of the coating and LVT.

Scrub and Recoat Procedures:

1. Dust mop floor to remove all dry soil and loose debris prior to cleaning.
2. Clean the surface using NCL® QWIK-SCRUB™ at a 1:10 dilution using a mop and bucket or automatic scrubber with a BLUE cleaning pad. Rinse and allow to dry thoroughly.
3. Using a wet mop or microfiber applicator, apply LVT-PROTECT™ at a rate of 2000–3000 sq. ft. per gallon. Allow to dry thoroughly.
4. On worn, dull, lifeless LVT more than one application will be required. Repeat step 3 as desired, allowing adequate time for drying between each coat.
5. Routine cleaning is recommended using NCL® LVT-CLEAN to prolong the life of the coating and LVT.

Product Specs

Keep out of reach of children. Keep from freezing. This product is not known to be a Hazardous Chemical as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200.
Contact your sales rep for SDS.